Resin guiding strip to be made by combining: • A self-adhesive stencil on a roll that is easy and quick to apply to the floor, • A two-component white BAO-ROLL...
>> Descriptiffamille :
Preparation of the substrate • surface to be treated must be mechanically intact, free from oil and gravel, at a temperature between + 5° C and + 30° C, at <80% RH. • on hydrocarbon asphalt: direct application, except for old asphalt, first apply a METAPRIM primer ref. 4228, by the roll, at a rate of 400 to 500g / m². • on concrete, do a light shot blasting, then apply a METAPRIM primer ref. 4228 beforehand. Attention: duration of mixing in a pot: 15 min at 20• c
>> Infos supplementaires :
Complies with Ministerial decree of 20 April 2017, (decree DGUHC 2007-53)
>> Desctexteproduit :
Resin guiding strip to be made by combining: • A self-adhesive stencil on a roll that is easy and quick to apply to the floor, • A two-component white BAO-ROLL methacrylate resin to be poured into the cavities of the stencil. Application 1 - Unroll the BAO-4N stencil roll, remove the protective film from the adhesive and apply it to the floor. 2 - Mix the resin beforehand until you have a homogeneous mixture. 3 - Add and mix with the mixer the dose of hardener in the resin. 4 - Pour and spread the BAOROLL resin onto the roll glued to the floor and fill the pre-cut cavities; 5 - Peel off and remove the roll in one part. 6 - Wait for complete hardening before allowing traffic.
References -Technical data
refArticle
Product name
descriptifReference
4242
Roller stencil "Bao-4N" - 10m
10 ml roll with cut-outs for 4 bands, application every 400 mm, wide edges and cavities already hollowed out. Thickness 5mm. Self-adhesive, immediate fixing, no need for masking tape, saving time. Adhesive compatible with all surfaces; asphalt, concrete, smooth slab, stone … does not leave a mark on removal. Disposable.
7092
"Bao-Roll" White - 8 kg
Two-component white methacrylate resin, intended for the production of high traffic urban marking requiring significant anti-slip properties such as guide strips but also pedestrian crossings, Stop-lines, arrows… In 8kg metal container. Certification usage for urban marking: 2.4 kg / m². Usage with BAO-4N 10m stencil: 12.7 kg for 4 bands / 9.5 kg for 3 bands.
Document downloads
Our newsletter
Sign up for our newsletter and stay up-to-date with all our news
