0

01 - Pure white

02 - Off White

03 - Light beige

04 - Light grey

How to install wall guards

  • PRODUCT DESCRIPTION

    Attachment of plates • Glueing using acrylic adhesive with A2 spatula (smooth part) • Double-side transfer adhesive installed by ourselves on order (see ref 461...

    Find out more

  • CHOICE OF CRITERIA
Detailed description

>> Desctexteproduit :
• Control support humidity rate using a PROTIMETER MINI device. • Check that the wall surface is not friable and free from dirt and grease, and that holes are sealed. • Before installation, plates must be kept at the same room temperature as the worksite for at least 24 h, in order to avoid deformation. • If plates are exposed to temperature changes of more than 10°C (for ex. behind French windows), expansion joints must be provided. • If installation is carried out at a room temperature significantly different from 20 °C, take the following dimensional variations into account:

>> Informations supplementaires p :
Attachment of plates • Glueing using acrylic adhesive with A2 spatula (smooth part) • Double-side transfer adhesive installed by ourselves on order (see ref 4619) • MS POLYMER sealant in addition to the double-side adhesive (for customisable plate).

References -Technical data
refArticle Temperature range Temperature de pose
Info 1 Minimum 15 °C
Info 2 Ideal 20 °C
Info 3 Acceptable 25 °C
Info 4 Maximum 30 °C

Our newsletter

Sign up for our newsletter and stay up-to-date with all our news