Quick and easy implementation

Black polyamide

Mill aluminium

1 Black board: 425 x 240 mm

Mill aluminium plate: 425 x 240 cm

Quick and easy implementation 1 - Position the PLAK cardboard templates on the substrate and connect them using their notches; on the front only, fix all the PLAKs using adhesive tape.

3 - Peel off the yellow films protecting the adhesive from the studs.

5 - Step on the PLAKs to bond the studs to the substrate.

Self-adhesive stud. Very high-performance adhesive, used on smooth floorings such as soft PVC, linoleum, wood, glass, laminate parquet, marble, tile floors (to be avoided when joins are greater than 3 mm). Ensure that the substrate is healthy, dry, free of dust and degreased with acetone.

2- Lift the PLAKs

4 - Slowly fold the PLAKs back into their initial positions, taking care to connect them by their notches.

6 - Remove the adhesive tape and cardboard templates.