0

"Bao-4NG" roller stencil - 10 m Stations

  • PRODUCT DESCRIPTION

    10 lm roll with 4 strip cuts, flows every 970 mm, wide edges and pre-cut cavities, specially adapted for stations and approved by the French Railways Company. T...

    Find out more

  • CHOICE OF CRITERIA
Detailed description

>> Descriptiffamille :
Resin guiding strip to be made by combining: • A self-adhesive stencil on a roll that is easy and quick to apply to the floor, • A two-component white BAO-ROLL methacrylate resin to be poured into the cavities of the stencil. Application 1 - Unroll the BAO-4N stencil roll, remove the protective film from the adhesive and apply it to the floor. 2 - Mix the resin beforehand until you have a homogeneous mixture. 3 - Add and mix with the mixer the dose of hardener in the resin. 4 - Pour and spread the BAOROLL resin onto the roll glued to the floor and fill the pre-cut cavities; 5 - Peel off and remove the roll in one part. 6 - Wait for complete hardening before allowing traffic. Preparation of the substrate • surface to be treated must be mechanically intact, free from oil and gravel, at a temperature between + 5° C and + 30° C, at <80% RH. • on hydrocarbon asphalt: direct application, except for old asphalt, first apply a METAPRIM primer ref. 4228, by the roll, at a rate of 400 to 500g / m². • on concrete, do a light shot blasting, then apply a METAPRIM primer ref. 4228 beforehand. Attention: duration of mixing in a pot: 15 min at 20• c

>> Desctexteproduit :
10 lm roll with 4 strip cuts, flows every 970 mm, wide edges and pre-cut cavities, specially adapted for stations and approved by the French Railways Company. Thickness 5 mm. Self-adhesive, immediate attachment, no need for masking tape, saving time. Adhesive compatible with all surfaces: asphalt, concrete, smooth tiles, stone, etc. Leaves no marks on removal. Disposable. Consumption: 1.3 kg BAO-ROLL/m on 4 ribs. Dim.: 32 cm x 10 m.

Our newsletter

Sign up for our newsletter and stay up-to-date with all our news