Two component glue (sachet to be diluted) only compatible with 3D tactile tiles and the EXTELINE guide rail. Consumption:• EXTELINE 3D tactile tile: 1 to 3 kg / tile• EXTELINE guide rail: 0.7 to 1 kg / strip• Open time: max. 10-15 min at 20°C • Can be stored for six months in its original packaging if kept away from extremes of heat and cold• Surface temperature between 5°C and 35°C• Hygrometry <80%• Ready for use: 30 min at 20°C• 8 kg Bucket.
See the technical datasheet
Warning : UN Hazardous product
MTA METHACRYLATECRYLATE ADHESIVE 8 KG BUCKET
4228
METAPRIM 5 L
Primer single-component only compatible with tactile tiles and EXTELINE rails: on concrete, tile, or wood supports. Consumption: 0.2 to 0.4 l/m² (roll). 5 l. Can may be covered after drying 30-45 min, max. 2 hrs. Temperature for application on flooring between +10°C and + 30°C.
See the technical datasheet.
Warning : UN Hazardous product
META PRIMER 5L BUCKET
24231
ACTISOL 1L
Activator to be applied to substrates before installing products using ADHEXT adhesive, it promotes adhesion to the substrate.
To be applied with a roller or brush to areas intended to be laid with a rail or tactile warning tiles or ADHEXT self-adhesive profiles.
To be applied just before gluing ONLY on concrete surfaces (200-400g/m² depending on porosity), porous and coated natural stone (200g/m²). The surface will appear moist before the tactile component is installed.
Not suitable for smooth concrete, nor ceramic tiles.
With 1L: 10-14 tiles 80 x 40 cm / 15-20 rails 100 x 22 cm / 100m profiles